Wholesale Sportswear Supplier in Bangladesh - Baseball Jerseys

Wholesale Sportswear Supplier in Bangladesh for Team Baseball Jerseys

League buyers reorder this jersey because it never changes: the same two-button build, the same colours and the same finish, season after season. Shadanatex supplies it as a wholesale sportswear supplier in Bangladesh to leagues, clubs, schools and teamwear brands that kit out whole squads in one order. The royal blue version on this page carries a white V collar band, raglan sleeves with white piping and a breathable mesh body kept plain for your team name and numbers.

Every order is made to your specification, with team colours matched across body, collar, piping and cuffs, and names and numbers applied to your artwork. The programme runs through our made-to-order programme, and event squads that prefer a tee can use our gym and event tees from the same floor. To kit out a squad for next season, send your inquiry with your colours and player list.

A Classic Two-Button Design Teams Recognise at Once

Some jersey styles date quickly; the two-button baseball jersey does not. The short placket and V collar band are the look players have worn for generations, and this royal and white version keeps that shape clean and uncluttered, with the piping along the raglan seams giving the shirt its definition without a single printed line on the body. For teamwear suppliers, that plain body is the point: one stock design in your colours becomes any club's kit the moment names and numbers are applied. We manufacture the jersey itself, ready for your decoration, in the colourway shown here or matched to your own team palette.

• Short placket and V collar band in the classic baseball shape
• Piping along the raglan seams, no printed line on the body
• Plain body ready for names, numbers and club marks
• Made in your colourway, shown here in royal and white

Raglan Sleeves Built Around the Throwing Arm

A baseball jersey earns its keep in movement. Set-in sleeves put a seam across the top of the shoulder, exactly where a throwing or batting motion pulls hardest, so this design uses raglan sleeves instead: the seam runs diagonally from collar to underarm, the shoulder itself stays smooth, and the arm swings free. The white piping traces that seam line, which is why the jersey looks sharp from the dugout, and the wider cut through the body lets the shirt move over a player's frame rather than clinging to it. Little construction choices like these are what separate a jersey made by a sportswear factory from a plain shirt with buttons added.

• Raglan seam runs diagonally from collar to underarm
• Shoulder stays smooth and the arm swings free
• White piping traces the seam line
• Wider cut moves over the player's frame

Sport Mesh That Stays Cool Through Nine Innings

Summer leagues are played in heat, and a jersey that traps sweat becomes heavy and uncomfortable by the middle innings. The polyester mesh on this shirt is knitted with a fine open texture that lets air move through the fabric and lets moisture escape, so the garment stays light on the body from the first pitch to the last. It also dries quickly in the wash cycle between games, resists creasing in a kit bag, and keeps its shape without the sagging that natural fibres can develop over a season. For clubs ordering one kit to last several seasons, that durability is worth as much as the look.

• Fine open mesh lets air move and moisture escape
• Stays light from the first pitch to the last
• Dries quickly in the wash cycle between games
• Keeps its shape across several seasons of play

Your Team Colours, Matched Across Every Trim Piece

Royal body with white trim is the colourway pictured, and the same pattern runs in the colour your team wears: body, collar band, placket, piping and cuff bands are each matched to your specification, so a reordered jersey next season sits invisibly beside this season's shirts. Send a physical sample, a colour reference or last season's shirt, and production matches to it before cutting begins.

Made in Bangladesh by a Sportswear Manufacturer

Bangladesh supplies teamwear to leagues all over the world, and our factory's part in that trade is the unglamorous one: patterns that stay fixed, fabric that is knitted to one specification, and sewing lines that build the same jersey the same way on every order. As a baseball jersey exporter we work with teamwear brands, school outfitters, league suppliers and promotional companies who cannot afford a kit that changes between the trial order and the repeat. The pattern, the mesh and the trim colours for your program are recorded once and followed every time you come back.

How a Team Order Moves From Artwork to Cartons

An order usually starts with colours and sizes: your palette, your size ratio across adults or youth, and the decoration plan you have in mind. A pre-production sample is made in your colourway so the shades, the placket and the fit can be checked on a real garment before bulk cutting. Once approved, production follows the sample exactly, finished jerseys are inspected against it, and cartons are packed by size so a kit manager can hand out a squad set without sorting. If your league runs a mid-season top-up, the recorded specification means the extra shirts match the original order precisely.

• Order starts with palette, size ratio and decoration plan
• Pre-production sample made in your colourway first
• Finished jerseys inspected against the approved sample
• Mid-season top-ups match through the recorded specification

Exporting to Leagues and Team Suppliers Worldwide

We export this baseball jersey to buyers in the USA, the UK, Germany, Canada and the UAE, from single-club orders to league-wide programs covering dozens of teams. Wherever your players are, the requirement is the same: every shirt in the carton identical, every colour true, every size honest. Send us your team colours, your size breakdown and the quantities you are planning, and we will answer with a production plan for this jersey in your specification.

What Kit Managers Check Before Committing a Squad

Experienced buyers judge a jersey on a short list of practical tests. They stretch the mesh and watch it recover, because a fabric that bags at the elbows by mid-season makes a whole team look tired. They work the placket buttons, check the stitching along the piping, and wash the sample hard to see whether the royal tone and the white trim stay true side by side. They also measure a youth size against an adult one, since a squad set only looks like a set when the grading holds across the full range. This jersey is built to pass those checks, and we are glad for any buyer to run them on a sample before a league order is placed, because a kit decision made on evidence rarely needs revisiting.

• Mesh recovery tested by stretch, elbows first
• Placket buttons and piping stitching worked by hand
• Sample washed hard to test royal and white side by side
• Youth and adult sizes measured against each other for grading

A Wholesale Sportswear Supplier in Bangladesh for League Programmes

League buyers rarely order one shirt at a time. They order a programme: a full squad set now, top-ups in mid-season, and the same design again the following year. Shadanatex works as a wholesale sportswear supplier in Bangladesh set up for exactly that pattern of buying. Each jersey is made to a recorded specification - your colours across body, collar band, placket, piping and cuffs, your size run across adult and youth sizes, your decoration plan - and every carton is checked against that record before it ships. Single-club orders and league-wide programmes covering dozens of teams run on the same terms: sample first, your approval, then bulk sewing to the approved garment. Clubs that also need training wear take it from the same factory - our panelled training tee is covered on the sportswear manufacturer in Bangladesh page.

• Full squad set now, top-ups mid-season, same design next year
• Colours recorded piece by piece: body, collar, placket, piping, cuffs
• Size run recorded across adult and youth sizes
• Every carton checked against the record before it ships

Baseball Jersey Programmes: Builds, Colours and Buyers

The pattern stays the classic two-button shape; the programme around it flexes. The options below are the ones team buyers choose between.

Every programme starts with a pre-production sample in your colourway, approved before bulk cutting.

Before the First Carton: What to Send and Confirm

A smooth league order is mostly decided before sewing starts. Confirm the colour reference for every piece of the jersey - body, collar band, placket, piping and cuffs - from a physical sample or a colour reference we can match to. Confirm the size breakdown across adult and youth sizes, and check the name and number list letter by letter, because that list is applied exactly as sent. Settle how the cartons should be split, by size or by team, and give the date the kit needs to be in players' hands, so sampling and production are scheduled against it. Send these points with your inquiry and the reply covers the full programme - for the MOQ, consult with our team.

• Colour reference confirmed for every piece of the jersey
• Name and number list checked letter by letter
• Carton split settled: by size or by team
• Delivery date set before sampling and production are scheduled

A Baseball Jersey Supplier in Bangladesh for League Programmes

League buyers need a baseball jersey supplier in Bangladesh who thinks in seasons, not single orders. This programme runs from our own baseball jersey factory in Bangladesh, where the pattern, piping specification and colour record are filed after your first order. Baseball jersey factories in Bangladesh that work order to order make a league re-brief its kit every year; here the record is reopened instead, and finished kits ship as a custom sportswear exporter in Bangladesh programme to team suppliers and leagues.

• Pattern, piping specification and colour record filed after order one
• Adult and youth sizes graded on one recorded specification
• Squad sets and league-wide programmes on the same record

Questions Team Buyers Ask Us

Can the jersey be made in our exact team colours?

Yes. Body, collar, placket, piping and cuffs are each coloured to your specification, and a pre-production sample in your colourway is made for approval before the bulk order is cut.

Do you add team names and player numbers?

The jersey is manufactured plain and ready for decoration, with a smooth body that takes print, embroidery and heat-applied numbers cleanly. Tell us your decoration plan with the order and the garment specification will be set to suit it.

What sizes can a squad order cover?

Adult sizes from S to XXL and youth sizes on the same pattern, so one order can kit out juniors and seniors in a single matching design.

Will a repeat order match this season's shirts?

That is how the program is run. Your colours, fabric and pattern are recorded at the first order and followed on every repeat, so top-up shirts blend in with the originals.

Can one order cover several clubs in the same league?

Yes. One jersey design can run across a whole league with each club's colours varied by team, the specification recorded per club, and cartons packed by team so each kit manager receives the right set.

What should we send for team names and player numbers?

Send the full name and number list with your order, checked as it should appear on the shirts. Placement, size and style are agreed on the pre-production sample, and the garment specification is set to suit your decoration plan.

How do baseball jersey factories in Bangladesh hold a design across seasons?

The pattern, colour references for every piece and the size grading are recorded with the first order. On this programme that record is reopened for top-ups and new seasons, so the design comes back the same.

Can a baseball jersey factory run youth and adult sizes in one order?

Yes. The size run covers adult and youth sizes on one grading record, packed by size or by team as your kit manager prefers.