Striped Dri Fit Polo Shirt Manufacturer in Bangladesh - Performance Team Polos

Striped Dri-Fit Polo Shirt - Rust Orange With Knitted Pinstripes

Our striped dri-fit polo shirt manufacturer in Bangladesh programme knits the stripe into the cloth itself: fine white and pale peach pinstripes run over the body and both sleeves of a burnt rust orange polyester micro mesh. The collar and two-button placket are self fabric, and the chest stays plain for a team crest or sponsor print.

The gallery shows the front with the pinstripes running straight, the colour range and the folded stack. Stripe spacing is set in the knit, so it cannot drift between sizes or between orders.

• Burnt rust orange micro mesh lead
• White and peach pinstripes knitted in
• Self-fabric collar, two-button placket

Fine Pinstripes Across Body and Sleeves

Most striped polos stop the pattern at the armhole. This one carries it through. Fine white and pale peach pinstripes, set as single lines and close pairs, run straight across the chest, the back and both short sleeves, so the shirt reads as one pattern from every side. The ground is a deep burnt rust orange on a light micro mesh knit, warm enough to stand out on a pitch and tidy enough for a clubhouse.

The Shirt, Part by Part

• Body: burnt rust orange micro mesh performance knit with fine white and pale peach pinstripes knitted in
• Sleeves: short sleeves in the same striped mesh, so the pattern continues over the arm
• Collar: self fabric knitted collar in the ground colour, sewn to keep its shape
• Placket: short two-button placket with buttons matched to the ground colour
• Colourways: rust orange leads; emerald green, royal blue, bright red and burgundy run with the same white pinstripes
• Fit: wide regular fit, graded S to 3XL

Why Thin Stripes Suit Team Kit

A pinstripe does quiet work on a team shirt. It gives a squad a shared look without a loud print, it photographs cleanly, and it hides the creases a hard game puts into a plain shirt. Because the stripes are knitted from yarn, the spacing is set on the machine and repeats garment after garment, so the twentieth shirt in a set lines up with the first one your committee approved.

Light on the Body Through a Full Match

Polyester mesh does not drink water the way cotton does. Sweat spreads over the surface of the knit and dries from there, helped by the air moving through the mesh openings. The shirt stays light in the second half, dries on a line overnight, and is ready for the next fixture without the heavy feel a soaked cotton polo keeps. That is capability the cloth has by its structure, and it is why games staff and training squads order this pattern season after season.

One Pattern, Five Team Colours

Rust orange leads the range, with emerald green, royal blue, bright red and burgundy on the same stripe spacing and the same block. A club can dress its first team, its seconds and its coaches in different colours and still look like one club. One size chart, one badge position and one packing format run across all five colourways, and a house colour of your own can be dyed and knitted to order.

Ordered by Clubs, Schools and Company Teams

Sports clubs order the shirt as a training and travel polo with the club badge on the chest. Schools put games staff and house teams in colourways matched to house colours. Companies dress sports-day teams, charity match squads and staff leagues in it, because it looks like a uniform and behaves like a sports shirt. Golf societies take it as a lighter alternative to their cotton society polo for summer fixtures.

From Your Tech Pack to Finished Cartons

An order opens with your specification: ground colour, stripe pairing, sizes, badge artwork and packing format. A pre-production sample is knitted in each colourway first, with the stripe repeat measured against your signed sample. Production yarn is dyed in one lot per colourway so a set matches from the first carton to the last. Shirts are knitted and sewn with the stripes lined up at the side seams, badges are applied after making, and the finished order is inspected before cartons leave through Chattogram port packed by colourway and size.

• Specification first: ground colour, stripe pairing, sizes, badge artwork, packing
• Sample knitted in every colourway, matched to your signed sample

Where Our Striped Dri Fit Polos Are Ordered

Striped polo shirt factories in Bangladesh knit this pattern for export. As a performance polo shirt supplier in Bangladesh, we send it to clubs, schools and company teams in the markets below.

Germany: club suppliers and sports retailers

German club suppliers order the shirt for regional teams that want one pattern across several age groups. The five colourways let a supplier cover home, away and training sets from a single block.

United States: school athletics and staff leagues

In the United States the shirt is ordered for school athletics staff, intramural teams and company leagues. The wide regular fit and the S to 3XL run suit mixed squads without a second pattern.

Canada: summer camps and outdoor programmes

Canadian camps and outdoor programmes dress their instructors in the bright colourways, so staff are easy to spot across a field or a waterfront. The mesh dries fast between morning and afternoon sessions.

United Kingdom: golf societies and cricket clubs

Golf societies and cricket clubs in the United Kingdom take the shirt as a summer team polo with the badge embroidered on the chest. The pinstripe keeps it smart at the clubhouse table after play.

Sweden: corporate sports days and event crews

Swedish companies order the shirt for sports days and charity fixtures, and event crews wear the strong colours so their people stand out in a crowd. One order covers several team colours on one pattern.

Checked Stripe by Stripe Before Packing

Inspection starts from the approved sample: stripe spacing measured, collar shape compared, placket straight, buttons secure, badge level, and body measurements taken across the size run. Stripes are checked across the side seams, because a pattern that jumps at the seam is the first thing a club secretary notices. A shirt that fails against its own colourway set does not ship.

Send Us Your Team Colours and Quantities

Send the colourways, sizes, quantities and badge artwork through the inquiry basket on this page. We reply with factory prices, a sample plan for each colourway, and a production schedule built around your season start or fixture date.

How the Micro Mesh Is Knitted

The body cloth is knitted on circular machines from polyester yarn, the pinstripes formed in the knit itself: white and pale peach yarns are fed in at intervals, so the stripe runs through the cloth and cannot crack or peel. Keeping the knitting in house is what lets a striped polo shirt factory in Bangladesh hold stripe spacing identical across the whole order.

• Stripes knitted in, never printed on top
• Open mesh that breathes without turning see-through

Custom Stripes in Your Own Team Colours

A striped dri fit polo shirts supplier in Bangladesh can only offer the colours already on the shelf. These shirts are knitted to order instead, so the ground colour is dyed to your club shade, the stripe pairing matched to your kit. Stripe width and spacing can move too, from a narrow pinstripe to a bolder banded stripe. Buyers who want one team polo shirts supplier for the whole club get the same pattern across age groups and squads.

• Pinstripe, mid stripe or banded stripe widths

Badges, Embroidery and Printed Marks

Most teams take an embroidered badge on the left chest, in colourfast thread. Larger marks and sponsor names print better across the back or sleeve. For crests and logos, clubs use us as a custom striped polo shirts manufacturer, with the badge set on the sample before bulk. Leagues that need a wholesale striped polo shirts supplier for several clubs at once can hold one badge position across every club set, so the whole league photographs as one family.

• Embroidered chest badges with a clean edge
• Names, numbers and sponsor marks printed

Sizes, Fit and Season-Long Wear

The block is a wide regular fit graded from S to 3XL, so a full squad fits from one pattern. As a striped dri fit polo shirt manufacturer in Bangladesh, we keep your pattern and badge file on record, so mid-season top-ups match sets already on the field. The mesh washes clean at low temperatures and dries on a line overnight. The same size grading runs across our whole polo shirt programme.

• S to 3XL on one regular fit block

Striped Dri Fit Polo Questions, Answered

Do the pinstripes run over the sleeves as well?

Yes. The stripe pattern is knitted across the body and both sleeves, so the shirt shows one unbroken pattern from the front, the back and the side.

Is the fabric cotton or polyester?

Polyester. It is a light micro mesh performance knit, chosen because it dries fast and stays light while the wearer is active. It is not a cotton pique.

Can we put our club badge on the chest?

Yes. Your badge is embroidered or printed on the left chest, set on the approved sample first so its position over the stripes is fixed before production.

Which colours does the stripe pattern come in?

Five standing colourways - burnt rust orange, emerald green, royal blue, bright red and burgundy, each with fine white pinstripes. Your own ground colour can be made to order.

What sizes can we order?

S to 3XL on a wide regular fit block. A separate women's grading or a longer body can be set at sampling if your programme needs it.

How are team orders packed?

By colourway and size as standard, with carton contents marked outside, so a kit manager can hand out sets without opening every carton. Mixed team kits can be arranged at sampling.

Can your striped dri fit polo shirt factory match our exact club colours?

Yes. Send a shirt, swatch or colour reference: the ground colour is dyed to match and proven on the pre-production sample before bulk knitting starts. Colour matching of this kind is standard work for a mens striped polo shirt manufacturer in Bangladesh.

Can kit suppliers order striped dri fit polo shirts wholesale for several clubs?

Yes. Each club's sets are packed and marked separately in one shipment, so the delivery splits club by club. As a striped dri fit polo shirt exporter in Bangladesh, we mark each club's cartons for export.

How Striped Performance Polo Orders Run

An order for these striped performance polos opens with your colourway card and size breakdown. The mesh is knitted with the stripes in place, a sample is sewn in rust orange, and stripe alignment across the placket and sleeves is checked before bulk cutting starts. For the minimum order quantity, consult with our team, since colourways and sizes set the run.

Team and training buyers usually confirm:

• Stripe colours against each body colour
• Crest or sponsor print positions
• Sizes graded for men, women or youth squads
• Your label and team packing by size
• Spare shirts for later squad additions

The same buyers order plain performance styles from our dri-fit polo shirt page and crew styles from the dri-fit work t-shirt range. Send your colourway card through the contact page to start the sample.

Because the stripes live in the knit, the lines stay sharp after a season of washing and the shirt keeps the light, airy feel of the mesh. Finished shirts are checked for stripe alignment at the side seams, placket centring and print position before packing, and cartons are marked by squad and size so kit hand-out runs quickly at your end.

To start, send:

• Your colourway card and size list
• Crest or sponsor print files
• Target delivery date